Intamsys Printing Material
INTAMSYS PEEK
- Is the most challenging to print with, controlling of crystallization
- High impact strength/wear resistance
- Other forms PEEK CF/GF option (aero, auto, defense, oil & gas)
- Similar strength to lower grade alloys
- Very high chemical resistance (after annealing)
- Can be used up to 260°C/500F (after annealing)
Material Specs
| Mechanical Properties | Test Method | Units | Typical |
|---|---|---|---|
| Tensile Strength | ISO 527 | Mpa | 99.9 |
| Young's modulus | ISO 527 | Mpa | 3738 |
| Elongation @ break | ISO 527 | % | 9.1 |
| Bending Strength | ISO 178 | Mpa | 147.0 |
| Beding Modulus | ISO 178 | Mpa | 3612 |
| Impact Strength | ISO 179 | kJ/m2 | 7.1 |
| Heat Deflection Temp | ISO 75 | C | 152 |
Do More with INTAMSYS PEEK
Contact us for more info.